How To Choose The Right High Brightness LCD Panel? Full-time JobJan 11th, 2022 at 08:31 Real Estate Baia Mare 16 views
How To Choose The Right High Brightness LCD Panel?
Due to the increasing use of electronic products, there are many electronic products used outdoors. How to choose a high-brightness LCD panel, the article content will give you a few points on how to choose a high brightness LCD panel.
What are the special requirements for high brightness LCD panel?
1. The brightness should be high, visible in the case of direct sunlight, the brightness of the high brightness LCD should be 1000-3000nit.
2. High temperature and low temperature resistance; high brightness LCD panel operating temperature should be -30 to +70
3. The anti-drop performance should be reliable; the high-brightness LCD panel should be able to meet the drop test.
4. The product perspective should be large, the display should reach 89 above the full viewing angle
Does high brightness of LCD panel lead to high power consumption?
The brightness of the high brightness LCD panel is determined by the brightness of the backlight. There are many ways to increase the brightness of the backlight, Classified by whether increasing power consumption:
1. Directly increase the power consumption to increase the brightness of the highlighted LCD screen.
increase the number of LED lights
increase the current of the LED lamp.
The advantage is to increase the brightness directly.
The disadvantage is that the power consumption is increased and the heat generation is increased.
2. A conventional design that does not increase power consumption but can increase brightness.
Use a film with higher optical effects, such as high brightness, high transparency, high reflectivity
LED light with large chip can increase brightness under the same power consumption
The advantage is that the brightness can be further improved, and the cost performance is higher, and the power consumption is increased by zero.
The downside is that costs are rising significantly.
The Importance of High Brightness LCD Displays For A Range of Industries
Liquid-crystal display, or better known as LCD, is a flat-panel display technology that primarily uses liquid crystals. Although liquid crystals do not directly emit light, experts use reflectors or backlights to produce colorful or monochromatic images.
Think of these liquid crystals and their light-modulating properties being sandwiched between thin glasses. A diversely wide range of applications benefits from LCD technology. Commonly known applications are televisions, smartphones, computer monitors, cockpit displays, digital signage, and touch screen displays. It is also applied to other electronic products such as DVD players, clocks, and video game devices.
Advancements in industrial touch screen flat-panel liquid-crystal displays
In nearly all fields and applications, LCD has replaced the older, bulkier display technology that is known as cathode ray tube or CRT. LCD offers more screen size options, which makes its flexibility more appealing to both consumer and provider. An LCD screen is thin and light and requires lower power consumption than a CRT display.
A industrial high brightness LCD display can consume much lesser than a heavy CRT display screen. Due to its low power consumption, there is little heat emitted while it is used. LCD screens also display sharper images that cannot be smeared using a native resolution. It also has a masking effect – an LCD grid can create an illusion of higher image qualities. Compared again to a CRT display, the LCD is preferable as it emits almost no electromagnetic radiation.
The Industries That Benefit from LCD High Brightness Displays
Many people may think that tech industries utilize LCD technology more than any other public or private field/sector. That is true to an extent. However, it is also a fact that people nowadays depend on the efficient and affordable technologies constantly developed in the modern age; thus, any institution or organization also depending on commercial investments or services would normally need the advantages offered by LCD.
LCD high brightness monitors are inexpensive, making them a viable option for companies that manufacture smartphones and other electric or handheld gadgets. In the world of advertising, commercial services may make use of LED screens since they are better for large-scale outdoor displays. On the other hand, some companies may use LCDs if they want to provide displays for enclosed spaces.
LCD touchscreen technology versus LED
Although LCD and LED are significantly different, LCD is more commonly used in touchscreen technology. LEDs emit more light naturally, but a high brightness LCD display can still attract the attention of the viewer. Video display-developing businesses utilize LCDs more than commercial businesses in a way that they utilize the technology to develop laptops, desktops, and all-in-one touchscreen computers. Laptops have a growing demand because of its own capabilities and advantages, and several laptop brands have already started to conduct other technological integration into LCD.
What is the impact of high working temperature on the LCD strip screen?
1. Too high temperature will cause devastating damage to the LCD strip screen
1LCD displays are usually packaged with silicone. If the working temperature exceeds the solid phase transition temperature (typically 125 °C), the packaging material will become a rubber state and rapidly heat and expand, resulting in an open circuit and failure of the LCD bar screen.
2If the operating temperature of the strip LCD display exceeds the maximum load-bearing temperature of the chip, its luminous rate will drop rapidly, resulting in light attenuation. The life of an LCD screen is reflected by the attenuation of light, that is to say, the brightness of the LCD screen will decrease over time.
2. The reason why temperature affects the luminous rate of the LCD bar screen:
1As the temperature increases, the concentration of electrons and holes increases, the band gap decreases, and the electron mobility decreases.
2High temperature will shift the blue peak of the chip to the long-wave direction, causing the chip's wavelength to not match the phosphor's wavelength, thereby reducing the light extraction efficiency outside the liquid crystal display.
3As the temperature increases, the quantum efficiency of the phosphor decreases, the luminescence decreases, and the light extraction of the liquid crystal display decreases, resulting in a decrease in the brightness of the liquid crystal display.
Since both LED and LCD TVs are based around LCD technology, the question remains: what is the difference? Actually, it’s about what the difference was. Older LCD TVs used cold cathode fluorescent lamps (CCFLs) to provide lighting, whereas LED LCD TVs used an array of smaller, more efficient light-emitting diodes (LEDs) to illuminate the screen.
Since the technology is better, all LCD TVs now use LED lights and are colloquially considered LED TVs. For those interested, we’ll go deeper into backlighting below, or you can move onto the Local Dimming section.
Three basic illumination forms have been used in LCD TVs: CCFL backlighting, full-array LED backlighting, and LED edge lighting. Each of these illumination technologies is different from one another in important ways. Let’s dig into each.
CCFL backlighting is an older, now-abandoned form of display technology in which a series of cold cathode lamps sit across the inside of the TV behind the LCD. The lights illuminate the crystals fairly evenly, which means all regions of the picture will have similar brightness levels. This affects some aspects of picture quality, which we discuss in more detail below. Since CCFLs are larger than LED arrays, CCFL-based LCD TVs are thicker than LED-backlit LCD TVs.
Full-array backlighting swaps the outdated CCFLs for an array of LEDs spanning the back of the screen, comprising zones of LEDs that can be lit or dimmed in a process called local dimming. TVs using full-array LED backlighting to make up a healthy chunk of the high-end LED TV market, and with good reason — with more precise and even illumination, they can create better picture quality than CCFL LCD TVs were ever able to achieve, with better energy efficiency to boot.
Another form of LCD screen illumination is LED edge lighting. As the name implies, edge-lit TVs have LEDs along the edges of a screen. There are a few different configurations, including LEDs along just the bottom, LEDs on the top and bottom, LEDs left and right, and LEDs along all four edges. These different configurations result in picture quality differences, but the overall brightness capabilities still exceed what CCFL LCD TVs could achieve. While there are some drawbacks to edge lighting compared to full-array or direct backlight displays, the upshot is edge lighting that allows manufacturers to make thinner TVs that cost less to manufacture.
To better close the local-dimming quality gap between edge-lit TVs and full-array back-lit TVs, manufacturers like Sony and Samsung developed their own advanced edge lighting forms. Sony’s technology is known as “Slim Backlight Master Drive,” while Samsung has “Infinite Array” employed in its line of QLED TVs. These keep the slim form factor achievable through edge-lit design and local dimming quality more on par with full-array backlighting.
What is local dimming?
Local dimming is a feature of LED LCD TVs wherein the LED light source behind the LCD is dimmed and illuminated to match what the picture demands. LCDs can’t completely prevent light from passing through, even during dark scenes, so dimming the light source itself aids in creating deeper blacks and more impressive contrast in the picture. This is accomplished by selectively dimming the LEDs when that particular part of the picture — or region — is intended to be dark.